TORK 240-Volt Lexan Housing Photo Control Part # 2000-2

Product Overview

The 2000-2 Photocontrol is great for flood lamp, patio lamp and decorative lighting from dusk-to-dawn. Our photocell resists effects of moisture and airborne contaminants by responding to the light spectrum near to that of a human eye. It has a delay up to 2 minutes to prevent false switching due to light from passing vehicles, lightning, etc. This photocontrol meets ANSI/UL773A ratings. All Lexan enclosures are impact and vandal resistant. Translucent Lexan Dome prolongs cell life by further screening out ultraviolet rays. Dome and base are ultrasonically welded for maximum strength. This 2000-21 photocontrol has energy savings as it works with screw base CFLs. To Turn ON is 1 to 5fc and Turn OFF is 3 to 15fc, without the slide in position. The ON/OFF adjustment is easily made by moving a slide cover with No tools required. The contacts remain closed between dusk and dawn and the unit fails in the ON position. TORK 2000-2 features 3 color coded, minimum 6 in. wire leads, #16AWG, rated for 105 degree C with an average under 1-Watt of power consumption.

• Lexan enclosures are impact and vandal resistant, translucent Lexan dome prolongs cell life by further screening out ultraviolet rays, dome and base are ultrasonically welded for maximum strength
• Sensors conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
• Photo controls contacts remain closed between dusk and dawn as the unit fails in the on position, easy installation with 3 color coded, minimum 6 in. wire leads, #16AWG, rated for 105 degree C that averages under 1-Watt power consumption with temperature range from -40 degree F to +140 degree F (-40 degree C to +60 degree C)
• Photo control has delay up to 2-minutes to prevent false switching due to light from passing vehicles, lightning, etc. to control flood lamp, patio lamp, decorative lighting from dusk-to-dawn
• No tools required for adjustments as ours is easily made by moving a slide cover, common adjustments include turn on is 1 to 5fc, turn off is 3 to 15fc, without the slide in position