Intended for vapor or liquid withdrawal service on DOT forklift or engine fuel containers. Two closing ow rates are offered – 1.5 GPM for medium to light duty vehicles and 2.6 GPM for those with greater fuel demands. Note: These valves do not incorporate an integral pressure relief valve and are intended for use in containers that have a separate pressure relief valve to adequately handle the containers capacity. Each of these valves incorporate an excess ow valve at the tanks inlet end to prevent excessive product loss in the event of a downstream fuel line failure. For the excess ow device to perform properly the service valve must be in the full open and back seated position.
- Excess flow GPM: 2.6
- 1 piece forged brass body construction
- Dual O-ring packing design
- Easy to repair / replace bonnet assembly
Proposition 65 Information
WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm – https://www.p65warnings.ca.gov/chemicals/lead-and-lead-compounds
5 years from the date of manufacture
There are no reviews yet.