These manifolds are designed to connect multiple cylinders to automatic changeover regulators. These manifolds have no check and are primarily for systems requiring more than one cylinder to be in operation at a time. The appropriate pigtail must be used to connect the manifold inlet to the service cylinder valve.
- Inlet: 1/4 in. female inverted flare (2)
- Outlet: 1/4 in. MNPT
- Material: brass
- Warning: an excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system; see the excess flow warning page for more information regarding the use of excess ow devices
- Pigtail or piping connection: 1/4 in. inverted flare
- Regulator connection: 1/4 in. MNPT
Proposition 65 Information
WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. https://www.p65warnings.ca.gov/chemicals
5 years from manufacture date
There are no reviews yet.