Testing a GFCI is a good way to verify that it is providing protection. While all GFCIs should be tested monthly, users often forget to conduct this test on a regular basis. Now there is a technology available that can supplement the manual testing and regularly conduct an automatic test of the circuit. In June of 2015 there was a revision to the UL (Underwriters Laboratory) standard 943 for Ground-Fault Circuit-Interrupters that improves safety for the end-user by requiring GFCI manufacturers to integrate an auto-monitoring (self-test) feature that performs a periodic test to confirm that the GFCI can respond to a ground-fault and, if not, it must visually and/or audibly indicate to the user that it needs to be replaced.
- For an added layer of protection, the GFCI regularly conducts an automatic internal test to confirm that it can respond to a ground fault
- Provides continuous ground fault protection – detects and trips on actual ground fault even when self-test is being conducted
- Status indicator light provides simple, intuitive feedback on power and protection status as well as indication of line/load reversal
- Patented lockout action prevents reset if GFCI is damaged and cannot respond to a ground fault
Proposition 65 Information
WARNING: These products may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. www.p65warnings.ca.gov